![](/uploads/1/Image/nouveautes_2010/solar-ripp-solar-heating3.jpg)
The solar collecting tubing is supplied in long rolls that are cut to size, and then mounted into support frames.
The collectors can be mounted vertically, horizontally or in fact at any angle. As the tubes have gaps between them, they do not catch the wind like large panels, and are much easier to mount.
The majority of the component parts are manufactured from PROPYSOL, which is one of the most resistant plastics to Chlorine and UV attack.
A solar sensing system, water temperature probe with a controller (SRC181GB) and a motorised valve complete the kit, to ensure that the system is only active when there is solar gain.
Solar-Ripp is distributed in the UK by Procopi UK Ltd.